Dryflow MarineDry 사용자 설명서 - 페이지 2

{카테고리_이름} Dryflow MarineDry에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dryflow MarineDry 6 페이지.

approximately 5mm gap.

4. Locate dryer assembly back plate

over screw heads through key hole

apertures. Pull down against surface

and fully tighten screws

5. Connect the wiring to

the unit as outlined in the Wiring

Instructions (Page 2).

6. Locate cover on back plate and

locate and tighten screws from

underneath (Illustration 2).

P.04

Intelligent Facility Solutions

IMPORTANT

After installation or servicing, units must be checked,

and only left when electrically and mechanically safe.

Servicing instructions

The minimum service period for the

dryer should be every 3 months or

more frequent intervals as experience

dictates:

1. Isolate the Hand Dryer from the

electricity supply before servicing.

2. Remove dust, fluff and any other

build up of foreign matter from

inlet and outlet grille areas

(Illustration 3).