3M TN201 안전 및 설정 지침 - 페이지 6

{카테고리_이름} 3M TN201에 대한 안전 및 설정 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. 3M TN201 8 페이지. Wheel weight system

Technical Update

3M™ Wheel Weight System TN2000 – Safety and Instructions

Page 6 of 8

Set-Up and

4) Insert second cutter onto left side

Instructions

(continued)

5) Remove box holder from stand by

6) Slide one ear of the box holder

of bracket, aligning mount holes as

shown. Secure with two supplied

socket head cap screws (A) using a

5/32" allen wrench. Insert desired

product rulers into each cutter

assembly. Adjust orientation of

dual cutter bracket so both product

rulers are easy to read.

loosening (2) set screws using a

1/8" allen wrench as shown.

back over the stand tube, then slide

the collar provided in the box

holder kit onto the stand tube, and

then slide second ear of box holder

back onto the tube as shown.

Align hole in collar with outermost

set screw hole location in box

holder. Install this box holder set

screw through collar hole and

tighten on stand tube using 1/8"

allen wrench. Also install second

set screw in box holder and tighten.

Adjust orientation of box holder to

allow feeding product directly into

right side cutter. Finally, tighten

collar clamp onto tube using 3/16"

allen wrench.