ANPVIZ NVR3108 사용 방법 - 페이지 2
{카테고리_이름} ANPVIZ NVR3108에 대한 사용 방법을 온라인으로 검색하거나 PDF를 다운로드하세요. ANPVIZ NVR3108 3 페이지. How to use hk series ipc connected u series nvr
camera again through the SADP tool. After activating the camera, connect it to the NVR POE
port.
Or you can reset the camera through the hard reset button of the camera, as shown in the figure
Remove the dome cover of the camera and find the reset button. After the camera is powered on
and started, press and hold it for about 10 seconds to reset the camera.After the camera is reset,
just activate it again through the SADP tool.
3. Camera connected to NVR
Connect the activated camera to the NVR POE interface through the network cable, wait for
about 2 minutes, after the camera is started, enter the NVR menu camera management interface,
click Refresh, the IP address of the camera will be refreshed, then click Edit for the corresponding