AbsolutAire UC-3 사용자 설명서 - 페이지 10

{카테고리_이름} AbsolutAire UC-3에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AbsolutAire UC-3 13 페이지.
AbsolutAire UC-3에 대해서도 마찬가지입니다: 사용자 설명서 (14 페이지)

Schedule (only visible if the unit has scheduling)

Day – Schedule day to be programmed.

Occ_Hour – Occupied hour to be programmed. This is the hour (in

24 hour format) that the unit will assume occupied status.

Occ_Minute – Occupied minute to be programmed. This is the

minute of the hour the unit will assume occupied status.

Unocc_Hour – Unoccupied hour to be programmed. This is the hour

(in 24 hour format) that the unit will assume unoccupied status.

Unocc_Minute – Unoccupied minute to be programmed. This is the

minute of the hour the unit will assume unoccupied status.

Conﬁg

Heat_Lockout – Heating mild weather stat setting. When the outside

or mixed air temperature is above this setting the burner will be

automatically disabled (only available if the unit has mild weather stat as an

option).

Cool_Lockout – Cooling mild weather stat setting. When the outside

or mixed air temperature is below this setting the cooling will be

automatically disabled (only available if the unit has cooling as an option).

Low_Temp_Alarm – If the unit discharges air below this temperature

set point for "Low Temp Time" minutes it will shut down and close the

isolation dampers (Only available if LTL is available).

Low_Temp_Time – The time delay (in minutes) for the "Low Temp

Alarm" (Only available if LTL is available).

Control_Type – Determines the type of control the unit will follow.

Enumerated "space/discharge".

Min_Discharge – The units minimum allowable discharge

temperature.

Max_Discharge – The units maximum allowable discharge

temperature.

Cycle_Occupied – Determines if the unit will cycle on/oﬀ to space

temperature when in occupied status. Enumerated "yes/no".

081721