AbsolutAire UC-3 사용자 설명서 - 페이지 8

{카테고리_이름} AbsolutAire UC-3에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AbsolutAire UC-3 14 페이지.
AbsolutAire UC-3에 대해서도 마찬가지입니다: 사용자 설명서 (13 페이지)

When viewing menu tree options, the standard convention is:

Point Name (as listed on the HMI) [BACnet ID] R or R/W (read only or

read/write).

Example:

Space Temp [AV33] R

Space Temp [AV33] R – Current space temperature at the User

Interface (or remote space temperature sensor if equipped).

Fan Command [MSV51] R/W – This is accessed by pressing the "up

arrow" from the main screen and is used to turn the unit ON and OFF. The

unit will cycle on and oﬀ to maintain space temperature by supplying the

temperature of air deﬁned in the CONFIG menu.

Mode [MSV53] R/W – This is the mode of operation. Select "Heat" or

"Vent" as desired (if the unit has cooling installed the choices will be "Heat/

Cool/Air")

Occ Set Point [AV51] R/W – Occupied Heat Set Point.

Unoc Set Point [AV52] R/W – Unoccupied Heat Set Point (only

available if the unit has scheduling as an option).

Burner Reset [MSV54] R/W – Burner reset command for use during

a burner lockout alarm. This is an "on/_on_" toggle selectable via the "up

arrow" button.

Space Temp [AV33] R – Current space temperature at the User

Interface (or remote space temperature sensor if equipped).

Outside Temp [AV34] R – Current outside air temperature.

Discharge Temp [AV35] R – Current discharge air temperature.

Heat Command [AV32] R – Current command (0% - 100%) issued

to the burner for heat.

Menu Tree

010622