Daily Youth Q3M 매뉴얼 - 페이지 7

{카테고리_이름} Daily Youth Q3M에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Daily Youth Q3M 20 페이지. Multi-function foldable motorized treadmill

V. Installation procedures

Each part of the electric treadmill has been strictly assembled and debugged before leaving the

factory. As long as they are installed according to the following steps, an electric treadmill will be

easily installed.

Step I: Installation of upright poles. Lift out the

treadmill and align the left upright pole with the

hole on the left of the chassis and fix them with

2 M8X45 hexagon socket pan head screws, 1

M8X16 hexagon socket pan head screws,

shims and spring washers. Then connect the

right upright pole with the chassis by the control

line inside the upright pole. Next, align the

upright pole with the hole on the right of the

chassis and fix them with 2 M8X45 hexagon

socket pan head screws, 1 M8X16 hexagon

socket pan head screws, shims and spring

washers. Attention: for the convenience of the

electronic meter's installation, screw up all the

screws on the upright poles in two turns. Don't

tighten them, as shown in the following figure:

Step II: Installation of electronic meter. Connect

the control line of the upright pole with the

control lines at two ends of the electronic meter.

Then plug the two ends of the electronic meter

into the left and right upright poles and fix the

meter frame on the left and right upright poles

with 2 M6X25 hexagon socket head cap screw,

shims and spring washers. Attention: Screw up

all the screws on the upright poles in two turns.

Don't tighten them, as shown in the following

figure:

- 7 -