Airthings Wave Plus 운영 매뉴얼 - 페이지 3

{카테고리_이름} Airthings Wave Plus에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Airthings Wave Plus 8 페이지. Radon and indoor air quality system for multi-room, connected monitoring
Airthings Wave Plus에 대해서도 마찬가지입니다: 사용자 설명서 (15 페이지)

페이지 인쇄

Easy to mount

Fix the mounting bracket to the ceiling or

wall. Make sure you use appropriate screws

for your wall type. The screws included are

intended for wood or drywall. Do not place it

close to vents or windows. Minimum 1 meter

/ 3 feet distance.

Thanks to the built-in magnet, simply snap

the unit onto the mounted bracket. Then

rotate it to the desired position.

Initial setup

You'll receive your first radon reading in

about an hour but we recommend leaving

your Wave Plus uninterrupted for at least 1

week for an accurate radon reading. Radon

levels fluctuate daily which is why continuous

monitoring is necessary. The TVOC and CO

sensors require at least 1 week for the initial

internal calibration.

Daily use

Magnetic

Wave in front of your device to see a visual

indication of your overall Indoor Air Quality.

Make sure you always have

Bluetooth enabled on your

phone and the app running

in the background. Every

time you are in range of your

device, the latest data will be

synced automatically. You

will be notified if any actions

are needed through the app.

The Wave Plus will enter

stand-alone mode if not

connected to a phone the last 7 days. Next

time the Wave Plus is connected to a phone

again, it will go back to regular connected

mode

The Wave Plus also includes Airthings

Smartlink which works with the Hub.

the Hub manual for the Smartlink info. The

Hub provides longer range as well as live

updates using the Airthings Smartlink.

Refer to