DS18 JK-HARNESS 사용자 설명서 - 페이지 11

{카테고리_이름} DS18 JK-HARNESS에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DS18 JK-HARNESS 16 페이지.

Radio side Installation

using Aftermarket Radio (With RCA pre-output)

A - Connect the DS18 T-Harness connector between the factory radio

unit and the radio harness using a radio harness adapter from

JEEP JK to the brand radio that you will install (not included).

B - Factory Radio Harness.

C - Aftermarket unit with RCA pre-outputs .

D - DS18 Harness (Radio Side).

1 - Front Audio Input connector (white/gray): use a supplied RCA

adapter wire and connect to Front RCA Pre-output in the Radio.

2 - Rear Audio Input Connector (green/violet): use a supplied RCA

adapter wire and connect to Rear RCA Pre-output in the Radio.

3 - Subwoofer Audio Input Connector (red/white): use a supplied

RCA adapter wire and connect to subwoofer RCA Pre-output in

the radio.

4 - Front Speaker output connector (white/gray).

5 - Rear Speaker (Tweeter/driver) output connector (green/violet).

6 - Remote wire: connect this to the Remote output from the radio.