DS18 CANDY-X48 소유자 매뉴얼 - 페이지 12

{카테고리_이름} DS18 CANDY-X48에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DS18 CANDY-X48 16 페이지. Monoblock subwoofer / stereo full range class d amplifiers
DS18 CANDY-X48에 대해서도 마찬가지입니다: 소유자 매뉴얼 (16 페이지)

페이지 인쇄

owner's manual

INSTRUCTIONS FOR FUNCTIONS AND CONTROLS

candy-x5B

1. HPF: High pass frequency adjusting knob, the frequency ranges from 40 Hz to 250Hz

2. X-OVER: Optional switches for high pass filter (HPF)/ full pass filter (FULL)/ low pass filter (LPF).

3. GAIN: Knob for volume adjusment.

4. LOW INPUT: Left and right channels inputs of the amplifier system. Preamplifier outputs of a source

(head unit) or of an external crossover must be connected to them.

5. SUB GAIN: Knob for SUB volume adjustment.

6. LPF: Low pass frequency adjusting knob, the frequency ranges from 50hz to150Hz.

7. BASS BOOST: The boost ranges from 0dB to 12dB

8. PHASE CONTROL: Phase adjusting switch, the phase ranges from 0-180

9. SUB REMOTE CONTROLLER OUTLET: To be connected with the remote controller, which helps to sub

gain. Please turn the knob of volume to be maximum before using the remote.

10. SUB REMOTE CONTROLLER BOX: Volume level knob.

11. INDICATOR LIGHT: When power LED sends out blue light, it meands that this amplifier have been

working now. When the LED sends out red light, it means that the self-protection of the amplifier.

12. GND: Ground terminal. Connect to the car chassis. Keep the lenght of the ground cable to a minimum.

13. REM: Terminal to be connected with the remote cable, which comes from the source and which

controls the amplifier switching on. Applied voltage must be between 10 and 15V DC.

14. +12V: anode of power connection terminals. Connect to the anode of car battery.

15. FUSE: standard automatic fuse, you must use the same power fuse if you need to change it.

16. SPEAKER: speaker connecting terminals.