DS18 FRX2K 소유자 매뉴얼 - 페이지 2

{카테고리_이름} DS18 FRX2K에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DS18 FRX2K 11 페이지.

DS18 FRX AMPS

Thank you for choosing DS18 FRX amps!

To Take full advantage of the DS18 FRX amps you have just purchased, please

read and follow the instructions in this manual. As with all of our products,

professional installation by an authorized DS18 FRX amps dealer is highly

recommended!

INTRODUCTION

The DS18 FRX Car amplifiers offer high quality audio reproduction for the

audiophile and the everyday listener alike. All models feature fully variable

crossovers with 12 dB per octave slopes, allowing you the ability to tailor the

sound to best fit the speakers and your listening preferences.

Platinum Finish Connections

Fully Variable Crossovers

Protection Circuitry

INSTALLATION

Professional installation by an authorized DS18 FRX amps dealer is highly

recommended! Otherwise, the performance of your new gear may not be

satisfactory. In the event that you decide to do your own installation, please read

and follow this manual very carefully. Failure to do so may compromise the

integrity of this product, your automobile, and possibly void the product warranty.

Amplifiers are generally mounted in the hatch/ trunk area of a car or SUV, and

under or behind the seat of most pick-up trucks. Select a location that will provide

adequate ventilation for the amplifier. Avoid mounting the amplifier with the fins

down. The fins should be facing up either vertically or horizontally. Secure the

amplifier with the screws provided.

Ensures solid electrical connections that resist

corrosion.

Fully variable crossovers promote installation

ease and save the cost of outboard crossovers.

Additionally, they may be used in conjunction

with outboard passive or active crossovers,

depending on the complexity required by the

system. The 12 dB per octave slope offers steep

roll-off above or below the selected frequency.

Against Overload, Short Circuit, Thermal, and

Reverse Polarity. These protection features are

designed to protect the amplifier from misuse,

as well as from common causes of amplifier

failure.