DSAN PerfectCue Mini 매뉴얼 - 페이지 3
{카테고리_이름} DSAN PerfectCue Mini에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DSAN PerfectCue Mini 5 페이지. Wireless cue light
페이지 인쇄Controls and Connections
1.
LOCAL ACTUATORS
Activate lights on connected units; trigger USB
keystrokes: Green (" "), Yellow ( B); Red (
2.
LIGHT BRIGHTNESS
Hi, Lo, Off
3.
SOUND VOLUME
Hi, Lo, Off
4.
HEADPHONE JACK
Accepts stereo phono plug; mutes speaker
5.
USB Ports "A" and "B"
For direct computer connection. Cue light sends
pre-programmed keystrokes.
Note:
Cue light may be powered from USB but other
connected devices will not work without external
power. External power is recommended for operation.
6.
MASTER - SLAVE SWITCH
Master turns on RF reception. When two or more cue
lights are connected by cable, set the one closest to
transmitter as MASTER; the other(s) as SLAVE.
7.
AUTO - USB SWITCH
Engage / disengage USB connections
8.
COMMUNICATIONS CHANNEL
For multi-unit proximate use. Match DIP switches
on transmitters.
9.
EXTERNAL POWER
Use DSan-supplied 12-volt AC power wall plug trans-
former with center pin (+) positive only.
]
"
"
\
Arrow sweep, repetitions,
duration, sound files set by
configuration app.
")
1
2
4
5
10.
RJ45 Jack
For interconnection with other cue lights.
Configuration
Download link for cue light configuration app (PC only)
www.dsan.com/PerfectCue
Install and launch program.
=
Connect computer using the "A" USB Port.
=
Enter new settings. Click "Save to PerfectCue".
=
11.
XLR Jack
Connect external power.
=
6
7