Daintree WWD2-4SM 설치 매뉴얼

{카테고리_이름} Daintree WWD2-4SM에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Daintree WWD2-4SM 7 페이지. Wireless controls wireless scene switch
Daintree WWD2-4SM에 대해서도 마찬가지입니다: 설치 매뉴얼 (7 페이지)

Daintree® Wireless Controls
Wireless Scene Switch
Product Overview
The Daintree® Wireless Wall Dimmer is a battery-powered wall switch for use in a Daintree Networked or Daintree EZ
Connect application. The WWD2-4SM device installs on top of an existing junction box to replace the existing
wall-mounted switch or can be mounted onto a wall. This wireless solution enables on/off and either dimming or scene
selection commands to be delivered to the luminaires in its commissioned space. The WWD2-4SM device can provide
either dual zone dimming control or allow the user to select from four configured scenes. The buttons on the
WWD2-4SM can be changed to clearly indicate the operation mode of the device. The communication with the Daintree
system utilizes a secure and reliable wireless connection which helps minimize installation costs and complexity.
Prepare Electrical Wiring
Electrical Requirements
• When replacing a line voltage switch, the
power must be off at the branch circuit
breaker. Bypass the line voltage switch to
provide uninterrupted power to the fixtures
and make sure the connection is properly
insulated before installing the wireless switch.
DT044