DSAN IP-2000XPC 빠른 시작 매뉴얼 - 페이지 2

{카테고리_이름} DSAN IP-2000XPC에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DSAN IP-2000XPC 2 페이지. Network extender

2. Configure the client signal lights with the timer's server address and set to obtain an

IP address through DHCP. If the connection to the server is from outside of the local

area network, configure the gateway address as well. This is usually the address of the

router.

Up to 8 clients can connect to one server. But additional server-configured Network

Extenders can be daisy-chained to the first server, each additional server being able to

serve 8 clients.

Light Indicators:

Use USB to connect to PC configuration application

DSan Corporation 142 Mineola Avenue, Roslyn Heights, NY 11577 [email protected] 516 625-5608

Network side

Green = Connected to a network (router)

Yellow-blink steady* = Data flowing to/from

another Network Extender on network

Yellow-blink intermittent = trying to connect to

another Network Extender

*Using PerfectCue, Yellow on only when cue is

transmitted or received

Device Side

Do not connect to network!!

Green = Connected to another Network Extender

Green-Red blink* = Data flowing to/from another

Network Extender

*Using PerfectCue, Red on briefly when cue is

transmitted or received