Daintree GE Current WFA100-SN 설치 매뉴얼 - 페이지 5

{카테고리_이름} Daintree GE Current WFA100-SN에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Daintree GE Current WFA100-SN 11 페이지. Wireless fixture adapter

Daintree

Networked Wireless Fixture Adapter (WFA100-SN)

Wiring Continued

This configuration allows the WFA100-SN to provide automatic

0-10V dimming control and to switch ballasts On/Off. It also

provides an analog photosensor input (0-10V). Remove the

jumper from the violet and gray terminals before connecting

the 0-10V dimming control wires.

Figure 8: Dimming Ballast(s), Photosensor configuration

Figure 5: On/Off (non-dimming) Ballasts

This configuration allows the WFA100-SN to provide automatic 0-10V

dimming control and to switch ballasts On/Off. It also provides an

occupancy sensor input. Set occupancy sensor for minimum time

delay. Remove the jumper from the violet and gray terminals before

connecting the 0-10V dimming control wires. Remove the jumper

from the blue and gray terminals before connecting the occupancy

sensor wires.

Figure 9: Dimming Ballast(s), Photosensor, Occupancy

Sensor configuration

Perform Installation Test Suite 3

Perform Installation Test Suite 4

Installation Guide