Anritsu Company VectorStar ME7848A-0140 빠른 시작 매뉴얼 - 페이지 9
{카테고리_이름} Anritsu Company VectorStar ME7848A-0140에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Anritsu Company VectorStar ME7848A-0140 17 페이지. Opto-electronic network analyzer systems
Anritsu Company VectorStar ME7848A-0140에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (15 페이지)
페이지 인쇄
5. For the ME7848A/E-0210:
a. Configure the MN4775A-0110 E/O Converter.
i. Turn the laser on.
A. Adjust the wavelength to 1550 nm.
ii. Set the modulator bias to quadrature.
A. Initiate a bias calibration.
iii.Set the VOA (variable optical amplifier) to constant power output and +3 dBm.
6. For the ME7848A/E-0211:
a. Configure the MN4775A-0111 E/O Converter:
i. Turn the laser on.
ii. Set the modulator bias to quadrature.
A. Initiate a bias calibration.
iii.Set the VOA (variable optical amplifier) to constant power output and +3 dBm.
7. For the ME7848A-0240:
a. Configure the MN4775A-0040 E/O Converter:
i. Turn the laser on.
ii. Set modulator bias to quadrature and dither.
A. Initiate a bias calibration.
iii.Set VOA (variable optical amplifier) to constant power output and -3 dBm.
8. For the ME7848A-0270:
a. Configure the MN4775A-0070 E/O Converter.
i. Turn the laser on.
A. Adjust the wavelength to 1550 nm.
ii. Set the modulator bias to quadrature and dither.
A. Initiate a bias calibration.
iii.Set the VOA (variable optical amplifier) to constant power output and +5 dBm.
9. For the ME7848A-0271:
a. Configure the MN4775A-0071 E/O Converter:
i. Turn the laser on.
ii. Set the modulator bias to quadrature and dither.
A. Initiate a bias calibration.
iii.Set the VOA (variable optical amplifier) to constant power output and +2 dBm.
10. For the ME7848A-0272:
a. Configure the MN4775A-0072 E/O Converter for 1550 nm operation:
i. Turn the laser on.
A. Set the wavelength to 1550 nm.
ii. Set the modulator bias to quadrature and dither.
A. Initiate a bias calibration.
iii.Set the VOA (variable optical amplifier) to constant power output and +4 dBm.
iv. Observe the response described in Step 9.
ME7848A/E QSG
PN: 10410-00777 Rev. C
3. System Check
QSG-9