DSC Classic PC580 사용 설명서 - 페이지 16

{카테고리_이름} DSC Classic PC580에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DSC Classic PC580 18 페이지.

FCC COMPLIANCE STATEMENT

CAUTION: Changes or modifications not expressly approved by Digital Security Controls Ltd. could void your

authority to use this equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

•

Re-orient the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•

Consult the dealer or an experienced radio/television technician for help.

The user may find the following booklet prepared by the FCC useful: "How to Identify and Resolve Radio/Television

Interference Problems". This booklet is available from the U.S. Government Printing Office, Washington D.C. 20402, Stock

# 004-000-00345-4.

IMPORTANT INFORMATION

This equipment complies with Part 68 of the FCC Rules. On the side of this equipment is a label that contains, among

other information, the FCC registration number of this equipment.

NOTIFICATION TO TELEPHONE COMPANY The customer shall notify the telephone company of the particular line

to which the connection will be made, and provide the FCC registration number and the ringer equivalence of the

protective circuit.

FCC Registration Number:

Ringer Equivalence Number:

USOC Jack:

TELEPHONE CONNECTION REQUIREMENTS Except for the telephone company provided ringers, all connections to the

telephone network shall be made through standard plugs and telephone company provided jacks, or equivalent, in such

a manner as to allow for easy, immediate disconnection of the terminal equipment. Standard jacks shall be so arranged that,

if the plug connected thereto is withdrawn, no interference to the operation of the equipment at the customer's premises

which remains connected to the telephone network shall occur by reason of such withdrawal.

INCIDENCE OF HARM Should terminal equipment or protective circuitry cause harm to the telephone network, the

telephone company shall, where practicable, notify the customer that temporary disconnection of service may be required;

however, where prior notice is not practicable, the telephone company may temporarily discontinue service if such action

is deemed reasonable in the circumstances. In the case of such temporary discontinuance, the telephone company shall

promptly notify the customer and will be given the opportunity to correct the situation.

ADDITIONAL TELEPHONE COMPANY INFORMATION The security control panel must be properly connected to the

telephone line with a USOC RJ-31X telephone jack.

The FCC prohibits customer-provided terminal equipment be connected to party lines or to be used in conjunction with coin

telephone service. Interconnect rules may vary from state to state.

CHANGES IN TELEPHONE COMPANY EQUIPMENT OR FACILITIES The telephone company may make changes in its

communications facilities, equipment, operations or procedures, where such actions are reasonably required and proper

in its business. Should any such changes render the customer's terminal equipment incompatible with the telephone

company facilities the customer shall be given adequate notice to the effect modifications to maintain uninterrupted service.

RINGER EQUIVALENCE NUMBER (REN) The REN is useful to determine the quantity of devices that you may connect to

your telephone line and still have all of those devices ring when your telephone number is called. In most, but not all areas,

the sum of the RENs of all devices connected to one line should not exceed five (5.0). To be certain of the number of devices

that you may connect to your line, you may want to contact your local telephone company.

EQUIPMENT MAINTENANCE FACILITY If you experience trouble with this telephone equipment, please contact the facility

indicated below for information on obtaining service or repairs. The telephone company may ask that you disconnect this

equipment from the network until the problem has been corrected or until you are sure that the equipment is not

malfunctioning.

Digital Security Controls Ltd. 160 Washburn St., Lockport, NY 14094

F53CAN-32394-AL-E

0.0B

RJ31X