DSC PC3000 사용 설명서 - 페이지 7

{카테고리_이름} DSC PC3000에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DSC PC3000 15 페이지.
DSC PC3000에 대해서도 마찬가지입니다: 사용 설명서 (15 페이지)

Programming Access Codes

Up to 15 access codes in addition to the Master Code can be entered from the

keypad.

Press [

], [5] and [Master Code]. The "Program" light will flash and the zone lights

will show which codes have already been programmed. To enter a new code or

change an existing code, first press the code number [0][1] to [1][6] and then enter

your [4 digit] code. To erase a code, press [

Note that the [

Press [#] to return to Ready.

When the Quick-Arm feature is enabled, the panel may be armed simply by entering

[

], [0] instead of a 4 digit code. The [

Enter [

], [6], [Master Code], [4] to turn ON and OFF the Quick-Arm feature. When

the command is entered, the keypad will beep 3 times if the feature is being enabled

and will sound one long beep if the feature is being disabled.

Press [#] to return to Ready.

The door chime feature is used, while the panel is disarmed, to provide a tone from

the keypad each time a door or window is opened or closed. The doors and

windows which will provide this indication are programmed by your installer.

Enter [

], [6], [Master Code], [6] to turn the door chime feature ON and OFF. When

the command is entered, the keypad will beep 3 times if the feature is being enabled

and will sound one long beep if the feature is being disabled.

Press [#] to return to Ready.

Enter [

], [6], [Master Code], [8] for a 2 second test of the keypad lights, keypad

sounder and alarm bells.

Press [#] to return to Ready.

] and [#] keys cannot be used in a code.

****

] instead of a [4 digit] code.

], [0] command will not disarm the panel.