Foxconn Silicon 3114 SATA RAID 사용자 설명서 - 페이지 11

{카테고리_이름} Foxconn Silicon 3114 SATA RAID에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Foxconn Silicon 3114 SATA RAID 18 페이지.

D. Setting RAID 10(RAID0+1)

a. To utilize RAID 10 function, four SATA hard disks should be installed.

b. Choose Create RAID Volume and press <Enter> to enter. Press <Tab> to

switch to RAID Level item, and then use Up and Down arrow keys to select

RAID10(RAID0+1), pressing <Enter> confirms.

c. Use Up and Down arrow keys to select desired strip size when enter Strip

Size menu. The available values range from 4KB to 128KB. The strip value

should be based on the planned drive usage. Some suggested selections

are listed below. The default selection is 128KB.

16K_Best for sequential transfer

64K_Good general purpose strip size

128K_Best performance for most desktops and workstations

RAID User's Guide