Foxda GF8806 사용자 설명서 - 페이지 8

{카테고리_이름} Foxda GF8806에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Foxda GF8806 18 페이지.

페이지 인쇄

for use with this particular model.The use of any other types may invalidate any approval

or warranty, and may be dangerous.Check the model of any charger before use with this

device.

3.4 Turn on and off

Press and hold the "End" key to turn the phone on.If the phone asks for a PIN or



security code, enter the code supplied with your SIM card (displayed as ****), and

press key"OK".

Press and hold the "End" key to turn off when the phone is power on.



Warning: Do not switch the phone on when use of a mobile is prohibited or when it

may cause interference or danger.

3.5 Using a password

You can set several types password by accessing the menu

settings". Here you can choose

Code"

 Phone Code

Phone Code is offered by our company.The default password is 0000. It protects

your phone from unauthorised use. If "Phone Code"is available, you need to enter

the password when the phone is turned on.

 PIN Code

PIN Code (4~8bits) is to avoid unauthorised use of your SIM card.

comes with the SIM Card from your network

you have to enter it whenever the phone is switched on. If you insert the wrong code

3 times, the SIM card will be locked. The unlock way is shown below:

1> Insert correct PUK Code follow the tips.

2> Then insert the new PIN Code, and press "OK".

3> Insert the new PIN Code again for confirmation.

4> If PUK Code is correct, SIM Card will be unlocked. PIN Code will be reset.

：

Warning

PUK Code will be available from your network operators.

 PUK Code

PUK Code（PIN Code unlock code，8bits）is for unlocking the pin code.If you insert

the wrong PUK Code 10 times, the SIM will be disabled. You will need to get a

replacement SIM from your network operator.

 PIN2 Code

PIN2 Code may be offered by your network operator. It support several functions

such as "Calling fee calculation". Please contact your network operator for more

information. If you insert the wrong PIN2 code 3 times, PIN2 code will be locked.

Only inserting correct PUK2 code can unlock PIN2：

1> Insert correct PUK2 Code follow the tips

2> Then insert the new PIN2 Code, and press "OK".

GF8806

"Power on PIN1","Change

operator. If the PIN code is activated,

"Settings">"Security

"Phone

PIN2"and

The PIN code