FOXEER LEGEND3 사용자 설명서 - 페이지 2

{카테고리_이름} FOXEER LEGEND3에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. FOXEER LEGEND3 8 페이지.

Basic

1. Main Board

2. Lens Module

3. Programming Board

4. WiFi Antenna

5. Programming Board Connector

6. Micro HDMI

7. Mini USB

8. 5V Power in

Basic Operations

Power On

After connecting with 5V power, click the POWER button on the

programming board, the buzzer will beep three times after the

camera is turned on. The blue and red LED lights are always on.

The camera is in standby mode at this time.

Mode Switch

After the camera is turned on, click the POWER button on the

programming board to switch between video mode and photo

mode. The blue LED is on in video mode, and the green LED is

on in photo mode.

Video and Photo

In video mode, click the SHUTTER/WIFI button, the camera will

start recording, the buzzer will beep once, and the blue and red

LED lights will flash, click the SHUTTER/WIFI button again, the

camera will stop recording, the buzzer will beep three times,

and the blue and red LED lights will turn on.

In photo mode, click the SHUTTER/WIFI button, the camera will

take a picture, the buzzer will sound once, and the green and

red LED lights will be on.