DAITEM SH273AX 설치 매뉴얼 - 페이지 9
{카테고리_이름} DAITEM SH273AX에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DAITEM SH273AX 13 페이지. Contact detector
DAITEM SH273AX에 대해서도 마찬가지입니다: 설치 매뉴얼 (4 페이지)
페이지 인쇄GB
• check detection of protected
entrance opening and closing:
entrance
entrance
open:
the test LED
the test LED
indicator
indicator
lamp lights
lamp goes
up
Pressing on the button for more
than 1 sec. causes the control
panel to give a "Test" message
when the panel is in test or
installation mode.
closed:
out
"beep, test detector X,
group Y immediate
(or delayed or combined)"
)
)
)
)
)
64
6. Maintenance
6.1 Battery low indication
The control panel indicates when
the contact detector's battery is
low.
To check whether there is a
problem with the detector battery,
press on the detector's test
button.
If the test LED indicator lamp no
longer lights up, the lithium
battery should be replaced.