ansio 1004 사용자 설치 및 운영 매뉴얼 - 페이지 4
{카테고리_이름} ansio 1004에 대한 사용자 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ansio 1004 7 페이지. 30” tower fan with remote
페이지 인쇄OPERATION
Switching On
•
Set the appliance on a dry, level and sturdy surface.
Plug the appliance to the mains.
•
On/Off, Speed Selection
To turn the fan ON, press ON/OFF button.
•
•
To change the speed of the fan, press the SPEED button.
Continue to press the button until you reach the desired speed. To turn the fan OFF,
•
press the ON/OFF button.
Oscillation
For the fan to oscillate, press the Oscillation button once. The fan will start oscillating
•
within a rotating angle of 60
To stop the oscillation, press the Oscillation button again. The fan will stop oscillating.
•
Timer function
Press TIMER button to start the timer mode. It can count down from a minimum of half
•
an hour to a maximum of 7.5 hours after which the fan will turn off automatically. The
timer can only be set in 30 minute intervals.
Continue to press TIMER button to the desired time. Once the timer counts down to
•
zero, the fan will automatically turn off.
Air Flow Selection Modes
Press the MODE button until the desired mode is reached.
Normal Mode sets a constant air flow at the currently selected speed.
•
Natural Mode offers a unique natural breeze setting. Enjoy the breeze as the fan
•
cycles randomly through all fan speed settings, simulating the natural breezes found
outdoors.
Taper Mode: Under Taper mode there are three operational speeds available:
•
Low speed: The fan runs at Low Speed in the Normal Mode continuously.
Middle speed: The fan runs for 30 minutes at Medium Speed in the Normal
Mode, then switches to run at Low Speed in the Normal Mode continuously.
High speed: The fan runs for 30 minutes at High Speed in the Normal Mode,
then switches to run at Medium Speed for 30 minutes in the Normal Mode after
which it switches to run at Low Speed in the Normal Mode continuously.
Customer Support - UK Toll Free 0800 080 6781 or +44 207 157 9795
| 4
P a g e
o
(Jan'23v.01)