DSC PowerSeries PC1864 설치 매뉴얼 - 페이지 6

{카테고리_이름} DSC PowerSeries PC1864에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DSC PowerSeries PC1864 13 페이지. System enhancement module
DSC PowerSeries PC1864에 대해서도 마찬가지입니다: 설치 매뉴얼 (17 페이지), 설치 매뉴얼 (20 페이지), 매뉴얼 (18 페이지)

페이지 인쇄

Ground

Ground Installation

Tighten nut to break paint and make

good connection to the cabinet

Battery

Standby Battery Guide

Battery Charging Current: 400 mA

Battery

Standby

Size

4Hr

24Hr

700mA

----

700mA

180mA

14A

700mA

470mA

NOTE: Battery capacity will

deteriorate with age and the number of

charge/discharge cycles. Replace every

3-5 years.

AC Wiring

AC Wiring (UL Listed Installations)

Primary: 120VAC/60Hz./0.33A

Secondary: 16.5VAC/40VA DSC PTD1640U, DSC PTC1640U,

DSC PTD1640U-CC Plug-in, Class 2 Transformer.

NOTE: Use DSC PTD1640 for Canadian installations.

NOTE: For UL Listed installations, do NOT connect transformer to a receptacle controlled by a switch.

PowerSeries PC1616/PC1832/PC1864 Installation Guide

A sealed, rechargeable, lead acid battery or gel type battery is required to meet UL requirements for power standby

times.

NOTE: UL Residential/Commercial Burglary installations require 4 hours of standby battery time.

NOTE: UL/ULC Residential Fire & Health Care installations require 24 hours of standby battery time. ULC

Commercial Burglary and Fire monitoring installations require 24 hours of standby battery time plus 5 minutes of

alarm condition.

NOTE: UL Holdup Alarm installations require 8 hours of standby battery time. Use control panel only in conjunction

with 7Ah or 14Ah batteries (700mA loading on AUX output).

- 6 -