ansio 1321 지침 및 운영 매뉴얼 - 페이지 10

{카테고리_이름} ansio 1321에 대한 지침 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ansio 1321 13 페이지. Oil filled radiator heater

SAFETY PROTECTION FEATURES

1. Overheat protection feature: When the temperature of the heater is

too high, the thermostat will automatically turn the heater OFF. When

the heater cools down completely, it can be used normally. Improper

usage of the heater, dusty environment etc. can cause this. The heater

needs to be cooled down completely and can be re-used as normal.

Accidental Tip-Over protection feature: When the heater is

accidentally tipped over, the safety tip-over switch at the base of the

heater will automatically cut the power off. When the heater is placed

in an upright position on an even surface, it can then be used normally.

CLEANING AND MAINTENANCE

Before attempting to clean this heater, always ensure that the power

plug is removed, and the heater is cooled down completely.

1. Accumulated dust must be removed from the heater with a soft cloth.

Wipe the exterior surface of the heater with a cloth moistened (not

dripping wet) with a solution of mild detergent and water. Dry the heater

thoroughly with a soft dry cloth before operating it.

2. Store heater in a clean and dry place when not in use.

3. Do not scrap the surface of the heater with sharp tools. This is to avoid

4. the surface getting rusty by damaging the paint coating.

NOTE: Portable electric heaters are designed to be a supplementary

heating source. They are not intended to be the main source of heating.

Problem

When the power is

turned ON, the

power indicator light

does not illuminate,

and the heater does

not work.

ANSIO 1321 (M20v01)

Possible Cause

The plug may not be

inserted well.

Solution

Check whether the plug is

properly inserted into the

wall socket. Alternatively,

ensure that the power

receptacle is fully

functional or try another

plug point.