FoxESS LV5200 사용자 설명서 - 페이지 14
{카테고리_이름} FoxESS LV5200에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. FoxESS LV5200 16 페이지.
FoxESS LV5200에 대해서도 마찬가지입니다: 사용자 설명서 (20 페이지)
페이지 인쇄1) Before starting, please dial the code to the corresponding position according to the actual number of
parallel machines.
2) After pressing the start switch for 1s, all LEDs will be on and flashing, which indicates that the battery
is started normally. After pressing the reset switch for 3s, the battery will turn on the discharge function.
3) After the communication with the inverter is disconnected for 10s, the battery will turn off the output. If
it does not recover after 10 minutes, the battery will be shut down.
7 Commissioning
There are seven LED indicators on the front of the battery packs to show its operating status.
- Running LED indication
After startup, the running indicator light flashes, which indicates that the equipment is in normal
operation.
- Alarm LED indication
When the battery is in normal operation, the alarm LED is off, and after the fault occurs, the alarm LED is
always on.
- SOC LED indication
Status
=100%
>100%>SOC>=80%
80%>SOC>=60%
60%>SOC>=40%
40%>SOC>=20%
20%>SOC>=0
Charge
Discharge
Light
Light
Light
Light
Light
Light
Light
Light
Light
Light
Flash
Light
Light
Light
Light
Light
Light
Light
Light
Light
Go off
Go off
Flash
Light
Light
Light
Light
Light
Light
Light
Go off
Go off
Go off
Go off
Flash
Light
Light
Light
Light
Light
Go off
Go off
Go off
Go off
Go off
Go off
Flash
Light
Light
Light
Go off
Go off
Go off
Go off
Go off
Go off
Go off
Go off
Flash
Light
12
Stand by
Go off