DSC LC-171 설치 지침 및 사용자 설명서 - 페이지 13

{카테고리_이름} DSC LC-171에 대한 설치 지침 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DSC LC-171 16 페이지. Dual-tech motion sensor (dual pir & microwave) with pet immunity

페이지 인쇄

8.4 Indications setting

LED OFF

Factory default setting

The LC-171 has two types of indicators:

1. LED

2. Buzzer

The installer can adjust both indicators operation during detection (ON or OFF) by using

switch number "1" for the buzzer and switch number "2" for the LED. When the LED indicator

is ON the LED indicator will activate for 1 second each time an intrusion is detected. When the

LED indicator is OFF the LED will not be used to indicate an intrusion has occurred.

When the Buzzer indicator is ON the Buzzer will activate for 1.8sec each time an intrusion is

detected. When the Buzzer indicator is OFF the buzzer will not be used to indicate an intrusion

has occurred. (Setting the buzzer ON gives the installer the ability to have audible

confirmation of intrusion detection during the adjustments and a walk test. After completing

adjustments and walk testing it is recommended to switch the buzzer OFF)

x Place the top cover to the base and close it using the bottom screw.

OFF

Buzzer ON

OFF

Factory default setting