Anslut 002-486 사용 설명서 - 페이지 6
{카테고리_이름} Anslut 002-486에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Anslut 002-486 6 페이지. Lightchain
페이지 인쇄EN
SAFETY INSTRUCTIONS
• Do not connect the product to the mains
power supply while the product is still in
the pack.
• Designed for indoor and outdoor use.
• Check that no light sources are damaged.
• Do not connect two or more string lights
together.
• No part of the product can be replaced or
repaired. The whole product must be
discarded if any part is damaged.
• Do not use sharp or abrasive objects
during assembly.
• Do not expose the cord or conductors to
mechanical loads. Do not hang objects on
the string of lights.
• This is not a toy. Exercise care if the
product is used near children.
• Unplug the transformer from the mains
power supply when the product is not in use.
• This string of lights must only be used
together with the supplied transformer
and must never be connected directly to
the mains supply without a transformer.
•
The product is not intended to be as
general lighting.
• Recycle products that have reached the
end of their useful life according to local
regulations.
WARNING!
The string of lights may only be used if all
seals are fitted correctly.
6
Symbols
Class III.
Approved as per
applicable directives.
Recycle a discarded product
in accordance with applicable
regulations.
TECHNICAL DATA
Input voltage, transformer
Output voltage, transformer
Output, transformer
No. of LEDs
Protection rating
USE
1.
Remove the string of lights from the
packaging.
2.
Connect the set to the transformer.
3.
Plug the plug into the mains.
230 V ~ 50 Hz
24 V DC
3.6 W
160 pcs.
IP44