Anslut 007294 사용 설명서 - 페이지 8
{카테고리_이름} Anslut 007294에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Anslut 007294 8 페이지. Lamp socket
페이지 인쇄EN
SAFETY INSTRUCTIONS
•
Do not connect power strips to each other.
•
Do not cover the power strip.
ELECTRICAL SAFETY
New installations and extensions to existing
systems should always be carried out by
an authorised electrician. If you have the
necessary experience and knowledge
(otherwise contact an electrician), you can
replace power switches and wall sockets,
fit plugs, extension cords and light sockets.
Incorrect installation can result in fatal injury
and the risk of fire.
WARNING!
The product is only intended for permanent
installation.
SYMBOLS
Read the instructions.
Approved in accordance with
the relevant directives.
Recycle discarded product
as electrical waste.
TECHNICAL DATA
Rated voltage
Max. capacity
Current
8
230 V ~ 50 Hz
15 kg
6 A
ASSEMBLY
INSTALLATION
1.
Connect the wires.
2.
Lock in place with the screws.
3.
Open the cable inlet, if necessary.
4.
Put on the casing and tighten the screw.
FIG. 1
Releasing the casing
Release the casing as shown.
FIG. 2
Disconnection of the conductors
FIG. 3