Foxfury Lighting Solutions 200-9T56 제품 설명서 - 페이지 5
{카테고리_이름} Foxfury Lighting Solutions 200-9T56에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Foxfury Lighting Solutions 200-9T56 20 페이지.
Foxfury Lighting Solutions 200-9T56에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (6 페이지)
페이지 인쇄
CHARGING THE BATTERIES
1.
Start with the AC Cable. Connect it to the AC-DC Adaptor.
The AC Cable is Universal to NEMA 5-15P , 3 prong for USA and will
work with a power range of 100VAC–240VAC 50/60 Hz.
2.
Then, plug the Barrel Connector (part of the AC-DC Adaptor) into the
Charging Port of the Nomad
Input voltage: 11–17VDC. Do NOT exceed!
The Nomad
charge it before using for the first time.
When the Charge Indicator FLASHES green it indicates that the
battery is being charged. When the Nomad
Charge Indicator will turn solid green.
Charging time will be approximately 7 hours.
CHARGING FROM A 12VDC VEHICLE ADAPTOR
1.
Insert the 12VDC Vehicle Adaptor into a 12V socket (located within
the vehicle).
2.
Then, insert the opposite end (Barrel Connector) into the Charging Port of
the Nomad
.
®
NOTE: Do NOT start vehicle while the Nomad
while plugged in.
CHARGE INDICATOR
COLOR
GREEN (SOLID)
GREEN (FLASHING)
RED (SOLID)
*If a charging error occurs, please contact FoxFury Customer Service (see pg. 19).
NOTE: Continuously charging (leaving the unit plugged in) could damage the
Battery Pack and lead to a decreased battery life. Please disconnect the unit
once it is fully charged.
Please DO NOT leave AC-DC Adaptor plugged in for more than eight (8)
continuous hours.
.
®
360 is shipped with a 30% charge. It is important to
®
(FOR LOCATION, PLEASE REFERENCE PAGE 3)
DESCRIPTION
FULL Y CHARGED
CHARGING
CHARGING ERROR
is completely charged, the
®
is being charged or when using
®
5