Anslut 412-019 사용자 지침 - 페이지 19

{카테고리_이름} Anslut 412-019에 대한 사용자 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Anslut 412-019 20 페이지. Floor fan

• Loosen the lock nut (16) from the main tube (14) and insert the main tube (14) into the base

plate (15).

Tighten the base nut (16).

• Unscrew the locking screw B (13) and adjust to an appropriate height. Tighten the locking screw

B (13).

• Fit the junction box (9) on the upper tube (12) and tighten the locking screw A (10).

• Loosen the lock nut (4) for the rear grille from the motor unit (6) and fit the rear grille (5) on the

motor unit (6), align the three pins. Refit and tighten the lock nut (4).

• Fit the fan blade (3) on the motor shaft and lock with the dome nut (2).

• Position the front grille (1) against the rear grille (5), align and lock the clamp and tighten the

grille locking screw (18).

Plug in the power cord.

Use with the remote control

1. ON/SPEED

Start the appliance by pressing the ON/SPEED button. Press the button repeatedly to switch

between low, medium and high speed. The status lamp for the set speed comes on.

2. OFF-TIMER

Press the OFF-TIMER button to set the shut-off delay to 1, 2, 4 or 8 hours. The status lamp for the

set delay comes on.

3. OFF

Switch off the appliance by pressing the OFF button.

4. MODE

Press the MODE button to set the desired mode. The status lamp switches between red and green

for each activation.

When the status lamp lights red, the appliance is set to RHYTHM mode. The appliance switches

between small, medium and large airflow, and then back to the small airflow. The function starts

from the mode the appliance was in when the function was activated. When the function is

deactivated, the appliance returns to the mode it was in before the function was activated.

When the status lamp lights green, the appliance is set to SLEEP mode. The airflow automatically

decreases 1 step at 30-minute intervals, down to small airflow. The appliance switches off when

the set switch-off delay has elapsed.

5. The remote control has a range of at least 10 metres.

The functions can also be controlled using the buttons on the appliance.

USE