Foxfury Lighting Solutions 380-BT2P-OR 제품 설명서 - 페이지 4
{카테고리_이름} Foxfury Lighting Solutions 380-BT2P-OR에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Foxfury Lighting Solutions 380-BT2P-OR 12 페이지.
Foxfury Lighting Solutions 380-BT2P-OR에 대해서도 마찬가지입니다: 제품 설명서 (7 페이지)
페이지 인쇄BATTERIES
The BT Series requires four (4) AA batteries. Acceptable battery types
include: Alkaline, rechargeable NiMH or LiFeS
DO NOT use Lithium Ion AA batteries (3V , 3.3V or 3.6V) as they will
damage the unit and VOID the FoxFury warranty .
NOTE: Mixing of new and used, or different brand batteries is not
recommended as this could lead to leakage or explosion.
BATTERY INSTALLATION AND REPLACEMENT
1
4
1.
Turn the Locking Mechanism (located on the Battery Door) counter-
clockwise. Pull the Battery Door straight out, away from the Light Body .
NOTE: The Battery Door will remain attached to the Light Body .
2.
Then, tilt the Light Body up so that the Battery Holder slides out.
3.
Once the Battery Holder is out of the Light Body , flip the Battery Holder
over. Press the Battery Holder Release Button to open it.
4
2
LOCKING
MECHANISM
(1.2 to 1.6 volts each).
2
*
3
BACK
FRONT
BATTERY
HOLDER
RELEASE
BUTTON
USE HEX KEY
IN BATTERY
DOOR
LOCK HOLE