Foxfury Lighting Solutions Nomad P56 제품 설명서 - 페이지 13

{카테고리_이름} Foxfury Lighting Solutions Nomad P56에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Foxfury Lighting Solutions Nomad P56 20 페이지.
Foxfury Lighting Solutions Nomad P56에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (6 페이지)

페이지 인쇄

Make sure the Nomad

Open the Folding Tripo-Scope

Then, locate a Battery Cover.

Use a Phillips Head ( + ) #1 Screwdriver to remove the four (4) screws that

hold the Battery Cover. Once the screws are removed, pull the Battery

Cover off and set it aside.

Once the Battery Cover is removed, the Battery Tube is accessible.

At the TOP of the Battery Tube, there will be a red (positive) Battery

Tube Cap. Place an index finger on it and pull the tube out by the red Cap

(this should then help the bottom portion (black Cap) of the Battery Tube

to easily slide out of the Battery Compartment). This action is similar to

removing a AA battery from any generic battery holder.

To easily remove the Battery Tube from the Nomad

pull straight out from the "crown" of the Red Cap.

NOTE: The wiring for the positive ( + ) and negative ( – ) Caps will remain

attached to the Nomad

the Battery Compartment.

Remove the Battery Tube Caps (red and black) from each end of the

Battery Tube. This can be done by simply popping the Battery Tube Cap

off with one thumb.

DO NOT pull the Battery Tube Caps by the wires.

REPEAT STEPS 1– 4 FOR THE 5 REMAINING BATTERIES.

IMPORTANT!

Please follow applicable laws and regulations for transport and disposal

of batteries. For details on recycling please contact a government

recycling agency , a waste-disposal service, or visit reputable online

recycling sources such as www.batteryrecycling.com.

is OFF and UNPLUGGED before starting.

Legs so they are locked and deployed.

Body while the Battery Tube is pulled out of

Body , it is best to