Foxfury Lighting Solutions Nomad P56 제품 설명서 - 페이지 7
{카테고리_이름} Foxfury Lighting Solutions Nomad P56에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Foxfury Lighting Solutions Nomad P56 20 페이지.
Foxfury Lighting Solutions Nomad P56에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (6 페이지)
페이지 인쇄BATTERY LIFE
MODE
HIGH
MEDIUM
LOW
FLASHING
*Battery life may vary according to age and ambient conditions.
BATTERY LIFE INDICATOR
COLOR
GREEN
ORANGE
RED (FLASHING)
USING THE NOMAD
The Nomad
can run continuously by plugging it into a power source.
®
1.
1
Start with the AC Cable. Connect it to the AC-DC Adaptor.
2.
2
Plug the Barrel Connector (part of the AC-DC Adaptor) into the Charging
Port of the Nomad
3.
3
Press the Power/Mode Switch. The light will then turn ON.
The Nomad
System. If it is plugged in and the Nomad
being charged.
As long as the unit is plugged into a power source, (even if it has a
very low power) the light can be turned ON.
Input voltage: 11–17VDC. Do NOT exceed!
NOTE: The Nomad
BATTERY LIFE
3 hours
9 hours
24 hours
9 hours
DESCRIPTION
FULL BATTERY
CAUTION — BATTERY IS GETTING LOW
CHARGE IMMEDIATEL Y
PRIME WHILE PLUGGED IN
®
.
®
must be turned OFF in order to charge the Battery
®
will NOT accept a 24VDC input.
®
PRIME LUMENS
5,000
2,000
600
5,000
(FOR LOCATION, PLEASE REFERENCE PAGE 3)
is ON, the battery is NOT
®
P56 LUMENS
4,100
1,600
450
NA
7