Foxfury Lighting Solutions Nomad Prime 제품 설명서 - 페이지 15
{카테고리_이름} Foxfury Lighting Solutions Nomad Prime에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Foxfury Lighting Solutions Nomad Prime 20 페이지.
Foxfury Lighting Solutions Nomad Prime에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (6 페이지)
페이지 인쇄REMOVING/INSTALLING THE DIFFUSER LENS | 1 MIN
1
1.
Press the retaining fastener through the heatsink fins, laterally . The spring
1
end will compress allowing it to fit through the hole.
Use a small hand tool such as a flathead screwdriver.
2.
Then, pull the fastener along with the Diffuser Lens and tether free from
2
the Light Head.
3
3.
The Diffuser Lens can be placed between the two most distal heatsink
fins for a temporary holding place when adjusting from Area to Spot, to
360° with the Scene Cap, or during routine maintenance.
FOR RE-INSTALLATION: Repeat steps 1–2 in reverse order. Make sure that
the centerline of the loop at the end of the tether is placed between the two
most distal fins and aligned with the hole when inserting the fastener.
2
3
15