Foxfury Lighting Solutions RUGO 700-300 제품 설명서 - 페이지 5

{카테고리_이름} Foxfury Lighting Solutions RUGO 700-300에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Foxfury Lighting Solutions RUGO 700-300 14 페이지.

CHARGING THE POWER PACK

Press and hold the Power Pack Release Lever located on the Light Head

portion of the Rugo

While maintaining pressure on the Power Pack Release Lever, pull the Light

Head and the Power Pack apart.

If unable to pull apart easily (due to resistance of the internal rubber

gasket), try moving the Power Pack back and forth while pulling apart.

NOTE: Once apart, be sure to keep both ends dry and away from

water, moisture and dust. While the Power Pack and Light Head are

separated, the unit DOES NOT maintain its waterproof rating.

Insert the provided Micro USB Cable into the Power Pack— respect the

orientation/alignment. Then, insert the opposite end, USB (Type A) into a

USB compatible power source or into the included AC/DC Adaptor.

(Input: 100V–240VAC 50/60 Hz, Output: 5V DC 1000mAH).

The Charge Indicator will be solid red while charging. Once fully

charged, it will turn green.

Charging time will be approximately 2.5 hours.

After the Power Pack is charged, disconnect it from USB Cable.

**PLEASE NOTE: The Rugo

flipped to show the Power Pack Release Lever.

™

in steps 1–3 is shown with no mounts and is

™