DSC powerseries 9047 빠른 시작 매뉴얼 및 설치 매뉴얼 - 페이지 2
{카테고리_이름} DSC powerseries 9047에 대한 빠른 시작 매뉴얼 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DSC powerseries 9047 2 페이지. Panels, keypads & modules
페이지 인쇄Contact your DSC distributor
www.dsc.com
1-888-888-7838
4
.
Connect the Battery Cable
Ensure the battery cable is properly connected.
5
.
Attach the Front Plate
Install the front plate by simply snapping it onto the back plate.
6
.
Power up the System
Apply power to the PowerSeries 9047 by plugging in the transformer.
7
.
Enroll Wireless Devices
Use the quick enroll feature found in section [898] to enroll wireless devices.
8
.
Programming the PowerSeries 9047
Quickly program (4-digit code) the functions required for basic operation through template
programming, found in section [899]. Code prompts exist for pre-defined zone definitions, reporting
code formats, communication call directions, and DLS setup. Once all codes have been programmed,
you will be prompted to enter the monitoring station telephone number and account code, DLS access
code, entry and exit delays, and installer code.
9
.
Placement Testing
The proposed placement of each wireless device should be tested before it is mounted by entering
section [904]. Testing the signal strength between the PowerSeries 9047 and wireless devices can be
accomplished in a group (global placement testing) or individuall
WWW.DIYALARMFORUM.COM
Pa n e l s, K e y Pa d s & m o d u l e s
Quick-start
Installation Guide
Powerseries
y.
9047
™