Foxfury Lighting Solutions 380-BT2P-BL 제품 설명서 - 페이지 6

{카테고리_이름} Foxfury Lighting Solutions 380-BT2P-BL에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Foxfury Lighting Solutions 380-BT2P-BL 12 페이지.
Foxfury Lighting Solutions 380-BT2P-BL에 대해서도 마찬가지입니다: 제품 설명서 (7 페이지)

페이지 인쇄

OPERATIONAL MODES

HIGH mode: Press the Power/Mode Switch once. From any mode, press

twice (once for OFF and once for ON) to get back to HIGH mode.

LOW mode: From HIGH mode, press and hold the Power/Mode Switch

for 2.5 sec.

FLASHING mode: From LOW mode, press and hold the Power/Mode

Switch for 2.5 sec. To get back to LOW mode, press and hold the Power/

Mode Switch for an additional 2.5 sec.

OFF or to EXIT a mode: Press the Power/Mode Switch once.

NOTE: The light does not retain the mode in memory . Once you turn the light

ON, you will have to reselect the mode you desire.

ASSEMBLING THE WEDGE

The BT2+ comes with one (1) Wedge and it is an optional accessory for the

BTS. The purpose of the Wedge is to keep doors open. It can be placed under

a door or at the door hinge opening.

Place the narrow end of the Wedge on the bottom notch (located above the

Battery Door). Maneuver the wide end of the Wedge to the top notch (located

below the Charge Indicator).