Foxfury Lighting Solutions 480-331 제품 설명서 - 페이지 5
{카테고리_이름} Foxfury Lighting Solutions 480-331에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Foxfury Lighting Solutions 480-331 12 페이지. Shield light
Foxfury Lighting Solutions 480-331에 대해서도 마찬가지입니다: 제품 설명서 (12 페이지)
페이지 인쇄BATTERIES
The Taker B30 uses three (3) or six (6) CR123 batteries. As long as there
are at least three (3) installed, (either on the left or right side), the light will
function.
Using three (3) CR123 batteries decreases the battery life by half, but
does not effect the light intensity .
Mixing of new and used, or different brand batteries is not recommended
as this could lead to leakage or explosion.
BATTERY INSTALLATION AND REPLACEMENT
1
BATTERY
COMPARTMENT
COVER
1.
1
Open all four (4) of the Battery Compartment Tabs.
Insert six (6) CR123 batteries. Reference the plus ( + ) and minus ( - ) symbols
2.
2
located on the inside of the Battery Compartment for proper installation.
REASSEMBLING THE BATTERY COMPARTMENT
1.
Once batteries are installed, test the light's performance by activating the
1
Power/Mode Switch located on the top of the light.
2.
Secure the Battery Compartment Cover by snapping all four (4) Battery
2
Compartment Tabs. A 'click' should be heard as the snaps are shut.
NOTE: Make sure the Battery Compartment is properly closed to
maintain a water tight seal.
2
5