DSC CLASSIC PC1555 사용 설명서 - 페이지 5

{카테고리_이름} DSC CLASSIC PC1555에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DSC CLASSIC PC1555 11 페이지.

페이지 인쇄

View Event Buffer

The panel will store the last 128 events which occurred on the system. To view the event buffer, select

the "View Event Buffer" prompt from the user functions list. The keypad will display the event number,

partition, time and date of each event. To toggle to the event name, press the [ ] key. Use the arrow (<

>) keys to scroll through all of the events in the buffer. When you have finished viewing the events,

press [#] to exit.

Downloading Enable

To enable a six-hour downloading window from any system keypad, enter [ ] [6] [Master code] [5].

During this time, the panel will answer incoming downloading calls. For more information, please ask

your installer.

Fire Alarm Operation

Alarm

On a fire alarm, the bell or siren will pulse ON and OFF. The transmission of the alarm to the central

station is delayed for 30 seconds. If the alarm is not cleared within the 30 second delay, it will then be

transmitted to the central station.

Silence

To silence the bell or siren, press the [#] key. If the alarm is silenced and the smoke detector is not

reset, the alarm will resound after 90 seconds.

Resetting Smoke Detectors

Once the smoke detector is reset, if it still detects smoke, the alarm sequence will resound as

described above. If there is no smoke, the system will return to normal.

To reset smoke detectors from an LED Keypad:

Press [ ][7][2].

To reset smoke detectors from an LCD Keypad:

Press [ ] to enter the function list. Scroll to find:

Press (*) For<>

Press [ ] to select the output control. The display will read...

Output Control

Select Output<>

Use the arrow (< >) keys to find the following message and press the [ ] key to

Command O/P 1

select...

Select Output<>

Command O/P 2

NOTES: If you suspect that a fire alarm has transmitted and that there is no fire condition, call

the central station to avoid an unnecessary response. If a fire condition is apparent, follow your

evacuation plan immediately. If the alarm sounds at night, evacuate immediately.

The description above may not be applicable depending on how your installer has programmed

the fire alarm operations on your system. Ask your installer for more information regarding your

system's operation.

Household Fire Safety Audit

Most fires occur in the home. To minimize this danger, we recommend that a household fire safety

audit be conducted and a fire escape plan be developed.

For Service

Central Station Information:

Account #: ___________________________________

Installer Information:

Company: ___________________________________

Access Codes

Access codes are used to arm and disarm the system. There are 37 access codes available: 1 master

code, 32 regular access codes, 2 duress codes and 2 system master codes. Ask your installer for

more information on using the duress and master codes.

Only the Master Code can be used to program additional security codes and to change other system

features as well as to arm and disarm the security system. The Master Code will be supplied to you by

your installer. All keypad entries are made by pressing one key at a time.

All access codes can be programmed by following the procedure outlined in "Programming Security

Codes" on page 7.

NOTE: An access code can be a four or six digit number depending on how your installer has

programmed your system. Ask your installer for more information regarding access codes.

Arming the System

Arming from an LED Keypad:

If the Ready light is ON, the system is ready for arming. If the Ready light is OFF, check to see that all

doors and windows are closed and that motion is stopped in areas covered by motion detectors. The

system cannot be armed unless the Ready light is ON indicating that all zones are closed and the

system is in the Ready state.

Enter your access code. As each digit is entered, the keypad sounder will beep. If the access code

was entered incorrectly, the keypad buzzer will sound steadily for two seconds. If this occurs, press

the [#] key and re-enter your access code. If the correct access code is entered, the keypad sounder

will beep quickly and the Armed light will come ON. Exit the premises through the door indicated by

your installer as the Exit/Entry door.

The panel will provide an exit delay period, indicated by keypad beeps, for you to exit the premises

without causing an alarm. At the end of the exit delay period, the Ready light will turn OFF and the

system will be armed. The exit delay time can be changed by your installer.

Arming from an LCD Keypad:

When this message appears, one or more zones are not secured. To secure the

Secure System

system, close all doors and windows and cease all motion in areas covered by

Before Arming<>

motion detectors.

When this message appears, use the arrow (< >) keys to verify that the system is

Enter Code to

Arm System

< >

clear of troubles and that no zones are bypassed unintentionally (see "Viewing

Trouble Conditions" on page 12 and "Zone Bypassing" on page 11).

Enter Code to

If this display is showing, the system is in the Ready state and may be fully armed.

Arm System

To arm the system, enter your access code.

Telephone #: _________________________________