Anslut 411-125 사용자 지침 - 페이지 12
{카테고리_이름} Anslut 411-125에 대한 사용자 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Anslut 411-125 14 페이지. Electric radiator
페이지 인쇄
1.
Temperature control
2.
Voltage status lamp
Temperature control: To set the required room temperature, turn the temperature control as far as it goes
and wait until the required temperature has been reached. Slowly turn the temperature control back until
the status lamp goes off. The set point temperature is not set to the actual room temperature.
The radiator is fitted with a bimetal thermostat. The differential temperature on connection and
disconnection is +/- 2°C.
NOTE: The appliance may emit a slight smell or fumes the first time it is used, or if it has not been used
for some time. This is normal and soon stops.
Wall mounting
1.
Drill 4 holes in the wall as shown in fig., diameter 8 mm, depth 40 mm.
Distance between screws
ENGLISH
DESCRIPTION
INSTALLATION
12