Anslut 002-654 사용 설명서 - 페이지 10
{카테고리_이름} Anslut 002-654에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Anslut 002-654 11 페이지. Led floodlight
페이지 인쇄
EN
SAFETY INSTRUCTIONS
•
Always take basic safety precautions when
using electrical appliances to reduce the
risk of fire, electric shock and/or personal
injury. Carefully read all the safety
instructions before use.
•
Keep the product under careful
supervision when it is used by, or near
children. Keep children under supervision
to make sure they do not play with the
product.
•
Do not immerse the product or charger in
water or any other liquid – risk of fire and/
or electric shock.
•
Do not use the product near flammable
materials, or burn it – risk of explosion.
•
Do not expose the product to severe
strain, this could result in permanent
damage.
•
Never point the beam at the eyes of
people or animals.
SYMBOLS
Description of symbols used on the product.
Familiarise yourself with them to reduce the
risk of personal injury and material damage.
Approved in accordance with
the relevant EU directives.
Sort at source as
electrical waste.
For indoor use only.
(This symbol is on the battery
charger)
Safety class II, extra or double
insulation.
10
DESCRIPTION
1.
Extra bright 1 W LED spotlight.
2.
2 brightness modes.
3.
Requires 4 alkaline C batteries
(sold separately).
4.
Battery life: about 30 hours with high
brightness, 60 hours with normal
brightness.
USE
Select the required mode with the selector on
the casing.
Normal brightness → High brightness → Off.
1.
Mode selector
2.
Spotlight
FIG. 1
INSERTING THE BATTERY
The battery compartment is on the back of the
product. Release the battery cover by turning it
anticlockwise.
Insert 4 C batteries with the correct polarity.
Replace the battery cover.
1.
Batteries
2.
Close
3.
Open
4.
Handle
5.
Battery cover
FIG. 2
NOTE:
The product must only be serviced by qualified
service personnel using identical spare parts.
Make sure that the product is completely dry
before using it.