Daiwa DWA-9150 운영 구조 - 페이지 12
{카테고리_이름} Daiwa DWA-9150에 대한 운영 구조을 온라인으로 검색하거나 PDF를 다운로드하세요. Daiwa DWA-9150 14 페이지. Legacy 3d massage lounger
페이지 인쇄
SETUP
GROUNDING INSTRUCTIONS
This product must be grounded. If it should malfunction or break down, grounding
provides a path of least resistance for electric current to reduce the risk of electric
shock. This product is equipped with a cord having an equipment-grounding conductor
and a grounding plug. The plug must be plugged into an appropriate outlet that is
properly installed and grounded in accordance with all local codes and ordinances.
GROUNDING PIN
DANGER
Improper connection of the equipment-grounding conductor can result in a risk of
electric shock. Check with a qualified electrician or serviceman if you are in
doubt as to whether the product is properly grounded. Do not modify the plug
provided with the product – if it will not fit the outlet, have a proper outlet
installed by a qualified electrician.
This product is for use on a nominal 120-volt circuit and has a grounding plug
that looks like the plug illustrated. Make sure that the product is connected to an
outlet having the same configuration as the plug. No adapter should be used with
this product.
21
PRODUCT STORAGE AND MAINTENANCE
CLEANING
Before cleaning, switch off power and remove the power plug from the wall outlet.
Dip a soft, cotton cloth in neutral detergent and wring dry. Use it to wipe the pillow
cushion, back cushion, armrests, legrests, and any plastic parts of the chair.
Use a piece of wet cloth (without detergent) to re-wipe the pillow cushion and back
cushion. Place them in a well-ventilated location for drying.
Use a soft, dry cloth to re-wipe the armrests, legrests, and any plastic parts of the chair.
Use a soft, dry cloth to wipe the controller, and the power supply box.
CAUTION
Before any maintenance, always disconnect the power plug from the wall outlet.
To avoid electric shock, never touch the power plug with wet hands.
When cleaning the back cover of the massage chair, do not allow any detergent to
seep into the power supply box.
Do not use abrasive chemicals, such as benzene or alcohol, to clean this chair.
Damage to the chair may result.
DO NOT apply an iron or any other heated device to the chair.
STORAGE
Before putting into storage, wipe off all accumulated dirt and dust from the surface of
the chair. Cover the entire surface of the chair with a dust cover (not included).
CAUTION
Do not store the product under direct sunlight, nor in a location with high
temperatures. Doing so may cause the upholstery to fade.
MAINTENANCE
Upon detecting any of the following conditions during daily use, immediately turn off
power, disconnect the power plug from the wall outlet, and contact an authorized
repairman:
A burning smell
The cord is plugged in and the power
The power cord feels hot.
switch flipped on, but no functions operate.
Any other abnormal symptoms
CAUTION
Do not store the product under direct sunlight, nor in a location with high
temperatures. Doing so may cause the upholstery to fade.
22