Daiwa RELAX2 ERO 2.0 사용 설명서 - 페이지 12
{카테고리_이름} Daiwa RELAX2 ERO 2.0에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Daiwa RELAX2 ERO 2.0 12 페이지. Massage lounger
페이지 인쇄
TROUBLE SHOOTING
No.
Problem
Check the following:
Noises are heard
N/A
during operation
Has the power plug
slipped out of the wall
Operation fails to
outlet? Is the power switch
start
in the "off" position? Has
the fuse blown out?
Music does not play
Is your music in the
normally
MP3 format?
Double beeps are
Is the U disc well
heard upon pressing
connected?Is the U disc
buttons
currently initializing?Is
your music in the MP3
format?
Has the volume been
No sound is coming
turned to the lowest
from the speaker.
selection? The massage
chair has been idle for
over two hours.
Has too much weight
Backrest or legrest
been placed on the
fails to ascend or
descend
backrest and footrest?
Are the air tubes
Airbags within the
blocked?
seat and the legrests
fail to work properly
Airbags within the
The massage chair has
seat and the legrests
detected some error that
fail to work properly
it is unable to display.
Explanations / Remedies
These noises are normal and
arise from friction between
the massage rollers and the
leather cover.
Connect the power plug
securely to the wall outlet.
Switch power to the "on"
position. Replace the fuse
with another of the same
type.
Replace with a music source
in the MP3 format
Reconnect the U disc.
Wait 5-10 seconds. Then
make your selections by
pressing buttons. Replace
with a music source in the
MP3 format.
Turn up the volume.
Press the power button
again to refresh functions.
Decrease burden by
removing weight from the
backrest or footrest.
Clean out the air tubes.
Turn off power, then turn it on
again. If the problem
persists, disconnect the
power plug from the wall
outlet and contact an
authorized repairman
TECHNICAL SPECIFICATIONS
Product name: Relax 2 Zero 2.0
Product Model: USJ-9050
Rated voltage: 100-120 V
Rated frequency: 50/60 Hz
Rated power: 240 W
Safety design: Class I