Daiwa SS-330W 사용 설명서 - 페이지 4

{카테고리_이름} Daiwa SS-330W에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Daiwa SS-330W 5 페이지. Switch mode power supply
Daiwa SS-330W에 대해서도 마찬가지입니다: 사용 설명서 (2 페이지)

페이지 인쇄
Daiwa SS-330W 사용 설명서
How to adjust the input voltage from AC 100V to AC 220V use.
CAUTION: HIGH VOLTAGE IS PRESENT !
1)
Prior to any modification, be absolutely positive the power cord is removed from the back of the unit
2)
Remove the 6 screws holding the top of the case in position.
3)
Pull the large blue wire with spade connector off from the spade receptacle marked AC 100V on the circuit
board.
4)
Push the blue wire with spade connector onto the spade receptacle marked AC 230V on the circuit board
firmly.
5)
Replace the upper cover with the original screws.
The 8A fuse installed is intended for 110V. After changing the input voltage
to 220V the fuse must be changed from 8A to 4A.
Daiwa SS-330W
30Amp switching power supply
Do not alter or in any way attempt to make
any changes other than described below
IMPORTANT