DSC PowerSeries PC1616 설치 매뉴얼 - 페이지 10

{카테고리_이름} DSC PowerSeries PC1616에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DSC PowerSeries PC1616 20 페이지. System enhancement module
DSC PowerSeries PC1616에 대해서도 마찬가지입니다: 설치 매뉴얼 (17 페이지), 설치 매뉴얼 (13 페이지), 빠른 매뉴얼 (4 페이지), 매뉴얼 (18 페이지)

페이지 인쇄

ADD & DELETE Z-WAVE DEVICES

Please visit the Dealer Website Support Resources for a complete

explanation of Z-Wave communication, Z-Wave signal strength,

and additional installation resources.

Alarm.com will not recognize any Z-Wave devices previously learned into

the panel. These devices will need to be deleted from the previous Z-Wave

network and added to the SEM for the customer to use Alarm.com's home

automation services (e.g. automation control via customer website, app,

and intelligent automation rules).

If the customer is on a different interactive platform,

TIP:

we recommend having them log in to that site and taking

screenshots of notifications, rules, and home automation

device names for reference later.

For optimal Z-Wave signal strength, make sure the orange Z-Wave

antenna is pointed down toward the tabs at the base of the SEM.

ADDING Z-WAVE DEVICES

Using the Dealer Website or MobileTech is strongly recommended.

Using MobileTech

Move all Z-Wave devices to their final location on the property.

Open MobileTech and select the customer.

Navigate to the Equipment List screen.

Select emPower Management.

Select Add Z-Wave Devices.

Wait for the bolded message: Checking for new devices on

the network.

Trigger a device to add it to the network.

When a device is added successfully, it will show up on

this screen following a 30 second delay.

Continue triggering devices. You may add several devices

to the network without re-entering Add Mode.

Z-Wave

Button

Z-Wave

Antenna