DSC PowerSeries PC1616 매뉴얼 - 페이지 16
{카테고리_이름} DSC PowerSeries PC1616에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DSC PowerSeries PC1616 18 페이지. System
enhancement
module
DSC PowerSeries PC1616에 대해서도 마찬가지입니다: 설치 매뉴얼 (17 페이지), 설치 매뉴얼 (13 페이지), 빠른 매뉴얼 (4 페이지), 설치 매뉴얼 (20 페이지)
페이지 인쇄
DSC Power Series PC1616 PC1832 PC1864 System Manual
[3] - G, H, I, 3
[4] - J, K, L, 4
[5] - M, N, O, 5
[6] - P, Q, R, 6
[7] - S, T, U, 7
[8] - V, W, X, 8
[9] - Y, Z, 9, 0
[0] - Space
7. When the required letter or number is displayed use the arrow keys ([< >]) to scroll to the next
letter.
8. When you are finished programming the Zone Label, press the [*] key, scroll to "Save," then press
[*].
9. Continue from Step 2 until all Labels are programmed.
Viewing the Event Buffer from a PK5500/LCD5500 Keypad
The event buffer will show you a list of the last 500 events that have occurred on your system. You must
use an LCD keypad to view the event buffer.
1. Press [*][6][Master Code].
2. To select Event Buffer viewing, press [*].
3. The keypad will display the event number, partition or area, and the time and date. Press [*] to
switch between this information and the event details.
4. Use the [< >] keys to scroll through the events in the buffer.
5. To exit event buffer viewing, press [#].
PK5500 Global Status Screen
When the keypad is loaned to global mode (pressing and holding the [#] key), you will see a Global
Partition Status screen. This shows basic status for up to 8 partitions, depending on the configuration of
your system.
Each partition is identified by a number. Below each number is the current status of that partition.
A - Partition is Armed
N - Partition is Not Ready to Arm
R - Partition is Ready to Arm
! - Partition is in Alarmed
- - Partition is Not Enabled
PK5500 Global Status Screen
https://alpha.adt.com/help/61[11/12/2018 9:40:17 PM]