DSC PowerSeries PC1832 매뉴얼 - 페이지 17

{카테고리_이름} DSC PowerSeries PC1832에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DSC PowerSeries PC1832 18 페이지. System enhancement module
DSC PowerSeries PC1832에 대해서도 마찬가지입니다: 설치 매뉴얼 (17 페이지), 설치 매뉴얼 (13 페이지), 설치 매뉴얼 (20 페이지)

페이지 인쇄
DSC PowerSeries PC1832 매뉴얼
DSC Power Series PC1616 PC1832 PC1864 System Manual
When the keypad is loaned to global mode (pressing and holding the [#] key), you will see a Global
Partition Status screen. This shows basic status for up to 8 partitions, depending on the configuration of
your system.
Each partition is identified by a number. Below each number is the current status of that partition.
A - Partition is Armed
N - Partition is Not Ready to Arm
R - Partition is Ready to Arm
! - Partition is in Alarmed
- - Partition is Not Enabled

Sensor Reset

Certain sensors, after having detected an alarm condition, require a Reset to exit the alarm condition (i.e.
glassbreak sensors, smoke detectors, etc.). Ask your alarm company if this function is required on your
system.
To reset the detectors, press and hold the Reset key for 2 seconds or press [*][7][2].
If a sensor fails to reset, it may still be detecting an alarm condition. If the sensor reset is successful, the
alarm is canceled. If unsuccessful, the alarm will reactivate or continue.
How can we help?
https://alpha.adt.com/help/61[11/12/2018 9:40:17 PM]
Return to Top
Search