Foxit TR8200 사용자 설명서 - 페이지 2
{카테고리_이름} Foxit TR8200에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Foxit TR8200 2 페이지.
페이지 인쇄TR8200 Thermostat User Manual
Save money by setting program schedules
This thermostat can be individual 7-day programmable. For each day of the week you are able to have 4 timed set temperature schedules.
Program
Start Time
1
WAKE
07:00
2
LEAVE
09:30
3
RETURN
16:30
4
SLEEP
22:30
Above are default program schedules, to make changes, follow easy steps as below.
In 7 day program mode
Press
Set
, you will see day display flashing.
1.
Schedule
2.
Use
or
adjust the day to the day you wish to start programming
or to the day you wish to edit an existin g event or program.
(Press
to select all days of the week, to cancel selecting all days of
All Days
the week, press
again.)
All Days
3.
Press
, the LCD will show program 1 with the time display flashing.
Next
Use
or
adjust the time you wish the program 1 event to commence
4.
for the currently selected day or days.
Next
Press
, the LCD will show a temperature value flashing.
5.
Use
or
set the desired heating temperature to be maintained for
6.
the program 1 event.
Press
, now the LCD will show program 2 with the time display
7.
Next
flashing, signifying the second daily event is now being programmed.
Repeat step 4,5,6 to set remaining programs. Press
8.
Note: It is faster to program the same schedule for the entire week and then to
adjust the exceptional days.
Lock the Keypad
To lock the keypad, press and hold the bottom left corner of display for 5 seconds, you will see a lock symbol
Reset to Factory Settings
With thermostat turned off, press and hold the up left corner of display for 5 seconds until you can see RESET on LCD.
Temporary Temperature Override
Touch the temperature display, and it will start to flash. Use
new set temperature until the next programmed event(comfort level). To cancel the override setting, press
Installation and Wiring
1
Carefully separate the front half of the thermostat
from the back plate by placing a small flat head
terminal driver into the slots on the bottom face of
the thermostat
Screw the thermostat back
plate on to the back box
Setpoint
22 °C
Set to the time you would like to wake to and the temperature you want during the morning, until you left for the day.
16 °C
Set to the time you leave home and the temperature you wish your home to maintain while you are away at work perhaps.
22 °C
Set to the time you return home at end of the day and the temperature you want during evening until bed time.
16 °C
Set to the time you sleep and the temperature you want overnight(usually a comfortable and energy saving temperature).
DONE
to store and exit.
or
Carefully unplug the ribbon connector
which is plugged in to the front half of
the thermostat
4
Re-connect the thermostat ribbon cable
and clip the two halves together
Explanation
In 5+2 day program mode
Set
1.
Press
Schedule
Use
or
2.
3.
Use
or
4.
Set time and temperature for the next time period(Leave). Repeat steps 2 and 3
for each time period of the weekday.
Press
to move to the weekend(sat-sun) time periods settings.
5.
Next
6.
Press
DONE
Day 1 - 5, refers to the weekday( Monday to Friday)
Day 6 - 7, refers to the weekend( Saturday and Sunday)
Note: During setting programs, press
and thermostat will maintain the temperature setpoint of the last executed program
until the beginning of the next program.
DONE
to adjust. Press
to accept, and you will see "O/RIDE" on LCD. Thermostat will maintain the
Run
Schedule
2
5
, you will see the time flashing.
to set your weekday Wake time(Mon-Fri), then press
to set the temperature for this time period, then press
to save and exit.
Delete
(if visible) will clear a program entry
.
To unlock, repeat the steps above.
3
Place the thermostat front half somewhere
safe. Terminate the thermostat as shown
in the diagrams below
Edited with the trial version of
Foxit Advanced PDF Editor
To remove this notice, visit:
www.foxitsoftware.com/shopping
Next
Next
This product should be
installedby a qualified
electrician.