DSC MAXSYS PC4851 설치 매뉴얼 - 페이지 10
{카테고리_이름} DSC MAXSYS PC4851에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DSC MAXSYS PC4851 11 페이지.
페이지 인쇄
FC C C O M P L I AN CE STAT E M E N T
CAUTION: Changes or modifications not expressly approved by Digital Security Controls Ltd. could void your
authority to use this equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communica-
tions. However, there is no guarantee that interference will not occur in a particular installation. If this equip-
ment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
•
Re-orient the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/television technician for help.
The user may find the following booklet prepared by the FCC useful: "How to Identify and Resolve Radio/Tele-
vision Interference Problems". This booklet is available from the U.S. Government Printing Office, Washington
D.C. 20402, Stock # 004-000-00345-4.
Im p o r t a n t I n fo r m at i on
This equipment complies with Part 68 of the FCC Rules. On the side of this equipment is a label that contains,
among other information, the FCC registration number of this equipment.
N
T
OTIFICATION TO
ELEPHONE
to which the connection will be made, and provide the FCC registration number and the ringer equivalence of the
protective circuit.
FCC Registration Number: F53CAN-36295-AL-N
Ringer Equivalence Number: 0.0
USOC Jack: RJ-71C
T
C
ELEPHONE
ONNECTION
to the telephone network shall be made through standard plugs and telephone company provided jacks, or
equivalent, in such a manner as to allow for easy, immediate disconnection of the terminal equipment. Standard
jacks shall be so arranged that, if the plug connected thereto is withdrawn, no interference to the operation of the
equipment at the customer's premises which remains connected to the telephone network shall occur by reason
of such withdrawal.
. Should terminal equipment or protective circuitry cause harm to the telephone network,
I
H
NCIDENCE OF
ARM
the telephone company shall, where practicable, notify the customer that temporary disconnection of service
may be required; however, where prior notice is not practicable, the telephone company may temporarily dis-
continue service if such action is deemed reasonable in the circumstances. In the case of such temporary discon-
tinuance, the telephone company shall promptly notify the customer and will be given the opportunity to
correct the situation.
A
T
DDITIONAL
ELEPHONE
telephone line with a USOC RJ-71C telephone jack.
The FCC prohibits customer-provided terminal equipment from being connected to party lines or being used in
conjunction with coin telephone service. Interconnect rules may vary from state to state.
C
T
HANGES IN
ELEPHONE
communications facilities, equipment, operations or procedures, where such actions are reasonably required and
proper in its business. Should any such changes render the customer's terminal equipment incompatible with
the telephone company facilities the customer shall be given adequate notice to effect the modifications to main-
tain uninterrupted service.
R
E
N
INGER
QUIVALENCE
connect to your telephone line and still have all of those devices ring when your telephone number is called. In
most, but not all areas, the sum of the RENs of all devices connected to one line should not exceed five (5.0). To
be certain of the number of devices that you may connect to your line, you may want to contact your local tele-
phone company.
E
M
QUIPMENT
AINTENANCE
your equipment supplier for information on obtaining service or repairs. The telephone company may ask that
you disconnect this equipment from the network until the problem has been corrected or until you are sure that
the equipment is not malfunctioning.
. The customer shall notify the telephone company of the particular line
C
OMPANY
R
. Except for the telephone company provided ringers, all connections
EQUIREMENTS
C
I
OMPANY
NFORMATION
C
E
OMPANY
QUIPMENT OR
(REN). The REN is useful for determining the number of devices that you may
UMBER
. If you experience trouble with this telephone equipment, please contact
F
ACILITY
firealarmresources.com
. The security control panel must be properly connected to the
. The telephone company may make changes in its
F
ACILITIES