DSC Maxsys PC4937 설치 매뉴얼
{카테고리_이름} DSC Maxsys PC4937에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DSC Maxsys PC4937 2 페이지. Audio expansion module
페이지 인쇄
PC4937/PC5937 Audio Expansion Module
PC4937/PC5937 Audio Expansion Module
PC4937/PC5937 Audio Expansion Module
PC4937/PC5937 Audio Expansion Module
PC4937/PC5937 Audio Expansion Module
Installation Instructions
1.
Introduction
The PC4937/PC5937 adds 8 audio ports to the Maxsys PC4936 or PowerSeries PC5936
audio interface module.
2.
Specifications
• Current draw: 5 mA
• Connect up to 8 audio stations (interior or exterior)
• Total current-providing capability between AUX terminals - 500 mA
• Input impedance at any microphone input - 25kΩ
• Maximum music input signal level amplitude - 200 mV peak to peak
3.
Unpacking
The PC4937/PC5937 package contains the following parts:
• One PC4937/PC5937 board
• 3 plastic standoffs
4.
Installation
Before beginning to connect the unit, ensure that all power (AC transformer and battery)
is disconnected from the control panel and from the Maxsys PC4936 or the PowerSeries
PC5936 module.
®
WARNING: Please refer to the System Installation Manual
for information on limitations regarding product use and
function and information on the limitations as to liability of
the manufacturer.
PC4937/PC5937
Audio Expansion Module